Tractus3D has launched their next generation 3D PEEK printer, the T650P. With its build volume up to 315 millimeters in height, high resolution (10 microns) and affordability (€7.900,-) we are setting a new standard in PEEK 3D printing. The T650P can 3D print a wide variety of filaments. From the more standard materials like PLA, ABS and PETG to high temperature materials such as PEEK, Carbon PEEK, PEI/ULTEM™ and everything in between, such as POM, PRO1, Nylon, NinjaFlex, etc.
The Tractus3D PEEK printer combines a fast printing speed with high accuracy. The travel speed is 400 mm/s and the printing speed goes up to 200 mm/s, depending on the filament used.
With a resolution of 0,01 millimeter (10 microns) on the XY-axis and a resolution of 0,05 millimeter (50 microns) on the Z-axis, the T650P prints even the finest details. When objects do not require such detail, it’s possible to 3D print at a lower quality up to 1000 microns (1 mm).
With a nozzle temperature up to 450°C and a maximum bed temperature of 175°C, it can handle all kind of filaments. From the more standard filaments like PLA, ABS and PETG to high-performance materials such as PEEK, Carbon PEEK and PEI/ULTEM™. Users are always free to choose their preferred filament supplier and not obligated to buy a particular brand.
The closed chamber preserves the heat of the 3D PEEK printer and temperature fluctuations are kept to a minimum. As a result you will not have to compromise on the quality of your prints.
Operating at low decibels, it’s possible to work next to the 3D PEEK printer without being distracted.
With just 9.5 kilo’s the Tractus3D T650P is one of the lightest 3D PEEK printers available.