operating-the-3d-printer , using-the-3d-printer

Removing the filament with a blob

LARGE VOLUME series 3D Printer

PRO series 3D printer

DESK series 3D printer

LARGE VOLUME series

Remove the tube from the feeder by removing the blue clip from the fitting and push down the edge of the fitting together with pulling the tube out of the feeder.

You will see the filament getting out of the feeder with the blob. Get a cutter to cut off the blob of the filament.

Now push back the tube inside the fitting place the blue clip back on the fitting and try to remove the filament again by squeezing the extruder a bit and pulling the filament.

PRO series

Remove the tube from the feeder by removing the blue clip from the fitting and push down the edge of the fitting together with pulling the tube out of the feeder.

 

You will see the filament getting out of the feeder with the blob. Get a cutter to cut off the blob of the filament.

Now push back the tube inside the fitting place the blue clip back on the fitting and try to remove the filament again by squeezing the extruder a bit and pulling the filament.

DESK series

Remove the tube from the feeder by removing the blue clip from the fitting and push down the edge of the fitting together with pulling the tube out of the feeder.

You will see the filament getting out of the feeder with the blob. Get a cutter to cut off the blob of the filament.

Now push back the tube inside the fitting place the blue clip back on the fitting and try to remove the filament again by pushing the black button on top of the printer and pulling on the filament.