When you change the glass bed plate please make sure you calibrate the machine after installing the new plate.
Remove the clips of the bed and take the glass plate off.
When placing a new plate back, do it the other way around
PRO series
When you change a bed plate please make sure you calibrate the machine after installing a plate.
Turn around (quarter turn) the bed clip with some force (it’s spring loaded). Do this for all 3 clips around the bed and remove the glass bed. When placing a new glass plate back, do it the other way around and carefully turn the clips
DESK series
When you switch from the PEI sheet bed to a glass bed plate or an Aluminium bed plate, or the other way around, please make sure you calibrate the machine after installing the new plate.
WARNING: Be careful not to cut yourself on this sharp part.
Gently push back a clip of the bed and with a flat screwdriver lift the bed plate. When the plate is higher than the clip, carefully slide the bed plate towards that side of the printer. When placing a new plate back, do it the other way around and carefully press the place under the two clips opposite side of the printer. Press down the plate .
Customer supportSupport ticket We do not only strive to have the best 3D printers in the industry, but we also strive to have the same quality level for our customer support. Over the years we have grown into a successful company thanks to the quality of our products, great customer support and the close relationships with our suppliers and customers. We take pride in the trust our customers have in us and want to continue offering everyone the best service possible. Contact info Bernseweg 14 5324 JW Ammerzoden The Netherlands Telephone: +31 (0)85 1307 270 Email: [email protected]
Customer support
Operating the 3D printer
Maintenance of the 3D printer
Learn about 3D printing
Back
Previous