To compare Tractus3D T1250 vs Anycubic Predator, we selected a 3D printer that is close in the printing volume, for us that is the T1250, but the T850 is also close in printing volume. Below you can find the comparison between the Tractus3D T1250 and the Anycubic Predator.
TLDR: The main differences between the Tractus3D T1250 and the Anycubic Perdator are that the T1250 has an enclosed chamber, can reach higher temperatures, is industrial build, has add-ons and upgrades, faster heat up times, easy swappable print heads, automatic bed leveling without add-ons, and the predator is a DIY kit as where the T1250 comes fully assembled.
|Technology||FDM / FFF||FDM / FFF|
|Delta or cartesian||Delta||Delta|
|Print height||600 mm||455 mm|
|Print diameter||350 mm||370 mm|
|XYZ resolution||10 micron||12.5 micron|
|Automatic bed leveling||Yes||yes, but add-on needed|
|Nozzle temperature||up to 300 °C (572 ºF)||up to 250 °C (482 ºF)|
|Travel speed||up to 300 mm/2||Up to 100 mm/s|
|Build plate temperature||up to 120 °C (248 ºF)||up to 100 °C (212 ºF)|
|Nozzle diameter||0.3 / 0.4 / 0.5 / 0.6 / 0.8||0.4|
|Mohawk filament cabinet|
|Base for perfect work height|