knowledge and contact support tractus3d
first-time-use , setup-for-first-time-use

Update the firmware

All printers will be shipped with the latest firmware onboard. In some rare situations it’s possible that while shipping your 3D printer a new firmware is released. In this case, follow these steps to update the firmware. Make sure you did the setup procedure for the web interface described in chapter 4.1 Set Up Network.

In the web interface go to Settings and tab General

Click on the blue button Upload File(s) and select the firmware you’ve received from Tractus3D. The interface will give you a notification that you uploaded a new firmware.

Click YES to update your firmware.

Check the Firmware Version number to see if the update is loaded successfully